Hot stamping
★ Only need to make a black draft of the processing position (K-100%), and the AI vector file is good.
★ Hot stamping, embossing drawings or text should be avoided too small, too thin or too complicated, and the effect after processing is not good.
★ There is a material on the film, and the effect of bronzing adhesion is not easy to fall off.
★ Hot stamping and punching will have an error of 1~2mm, and the hot stamping should not be hot on the printing, avoiding the position of the bronzing and the misplacement of printing.
★ Do not exceed the cutting or rolling range of the processing position to avoid peeling due to processing pressure.
★ The width of the bronzing graphic line is at least 0.5pt (2mm) or more, and the width of the convex image line width is at least 0.85pt (0.3mm) or more. Avoiding too thin lines or too thick a font can result in unclear lines or text smears after processing.
.jpg)
★ Hot stamping, embossing drawings or text should be avoided too small, too thin or too complicated, and the effect after processing is not good.
★ There is a material on the film, and the effect of bronzing adhesion is not easy to fall off.
★ Hot stamping and punching will have an error of 1~2mm, and the hot stamping should not be hot on the printing, avoiding the position of the bronzing and the misplacement of printing.
★ Do not exceed the cutting or rolling range of the processing position to avoid peeling due to processing pressure.
★ The width of the bronzing graphic line is at least 0.5pt (2mm) or more, and the width of the convex image line width is at least 0.85pt (0.3mm) or more. Avoiding too thin lines or too thick a font can result in unclear lines or text smears after processing.